
Special operations units, tactical entry teams, and night-vision shooters running suppressed pistols have historically faced a major holster compromise. Standard duty holsters enclose the muzzle plug at the bottom of the shell, forcing operators to either carry a suppressor detached in a belt pouch—losing immediate readiness—or rely on open-front, trigger-guard-only retention rigs that expose the pistol and can to debris, snags, and unintended release during dynamic movement. Resolving this operational gap in the 6000-series duty ecosystem, Safariland has officially launched the 6TS RDSQ SLS™ Suppressor Holster (offered in 6004RDSQ and 6005RDSQ configurations). Engineered around SafariLaminate™ thermo-molded construction, a suede-lined interior, and Safariland’s battle-proven SLS™ (Self Locking System) Rotating Hood, the RDSQ (“Red Dot Sight Quiet”) securely carries red-dot and weapon-light-equipped Glock 19 and Glock 45 pistols fitted with round suppressors up to 1.5 inches in diameter.
The Safariland 6TS RDSQ SLS Suppressor Holster combines SafariLaminate™ thermo-molded construction, SLS™ rotating-hood active retention, red-dot optic protection, and an open-bottom 1.5-inch suppressor pass-through channel equipped with a QLS 19 Locking Fork.
Build Specifications At-A-Glance
- Host Firearm & Accessory Fitment:
- Launch fitments engineered specifically for Glock 19 and Glock 45 (all generations) as well as dimensionally similar Glock clones (such as the ZEV OZ9).
- Requires a compatible full-size duty weapon light—including SureFire X300U / X300T, Streamlight TLR-1 HL / TLR-1 HL-X, or Nightstick TWM-30 / TWM-350 / TWM-850XL—which indexes and stabilizes the handgun within the widened suppressor channel.
- Accommodates round suppressors up to 1.5 inches in outer diameter (e.g., SilencerCo Spectre 9, Spectre 9K, Omega 9K).
- Clears major duty red-dot optics—including Trijicon RMR / RMR HD / RCR / SRO, Aimpoint ACRO, Holosun 407 / 507 / 508 / 509, Leupold DeltaPoint Pro, SIG Romeo, and Vortex Defender-ST / Venom—shielded by a removable optic hood guard.
- Retention & Draw Geometry:
- Secured by Safariland’s SLS™ (Self Locking System) Rotating Hood, omitting the ejection-port ALS lever to provide smoother vertical clearance for the extended slide-and-suppressor assembly.
- Configured with a straight-drop, top-draw cant to clear the full length of the suppressor cleanly without binding against the shell wall.
- Shell Construction & Interior Lining:
- Built from SafariLaminate™ (Boltaron) thermo-molded polymer with a protective grey suede lining that cushions both the pistol slide and the suppressor body against finish wear.
- Mounting & Model Variants:
- Ships standard with a QLS 19 Locking Fork mounted to the classic Safariland 3-hole pattern for modular swaps across QLS 22 receiver plates, UBL belt loops, and tactical shrouds.
- Available in STX Tactical and 500D Cordura wrapped finishes across the 6004RDSQ ($252.50–$260.25 MSRP) and 6005RDSQ with quick-release leg strap ($262.50 MSRP).
Handling Dynamics and Practical Utility
On the range and during movement drills, transitioning to the 6TS RDSQ feels immediately familiar to anyone trained on Safariland’s SLS hood mechanics. Depressing the thumb release and rotating the hood forward clears the back of the slide cleanly, allowing a straight-up vertical draw stroke. Because the traditional bottom muzzle plug is removed to let the suppressor extend past the lower opening, the draw requires a slightly longer vertical lift to clear the suppressor body from the lower shell, yet dry-fire and live-fire repetitions settle rapidly into sub-1.5-second presentations.
Crucially, pairing the pistol with a SureFire X300 or Streamlight TLR-1 series weapon light does more than provide low-light illumination—it anchors the chassis inside the holster. Because the lower body is widened to accept cans up to 1.5 inches in diameter, the weapon light body acts as the primary mechanical stop and lateral stabilizer, preventing wobble when sprinting or climbing.
Two practical field considerations stand out when running the RDSQ:
- Ride Height Management: Because the suppressor protrudes below the bottom edge of the holster shell, mounting the QLS 19 fork on a mid-ride or high-ride UBL (rather than a low-ride drop rig) prevents the suppressor endcap from striking the ground when kneeling or colliding with vehicle seats.
- Thermal Discipline: While SafariLaminate and suede handle normal training heat well, sustained rapid-fire mag dumps can push suppressor tube temperatures past 400°F—so operators must allow overheated cans to cool before reholstering to prevent thermo-molded shell distortion.
Target Operator Professional Profile
The Safariland 6TS RDSQ SLS Suppressor Holster is purpose-built for military special operations personnel, SWAT/tactical entry operators, night-vision shooters, and range professionals carrying suppressed, optic-equipped Glock 19 or Glock 45 sidearms.
Competitive Market Landscape
Unlike minimalist trigger-guard clips (such as the Trex Arms RagnarokSD or HUSH Holster) that leave the slide, optic, and suppressor body exposed with passive friction retention only, the 6TS RDSQ delivers full-wrap SafariLaminate™ impact protection, a removable optic hood, and active SLS™ rotating-hood security backed by Safariland’s modular QLS ecosystem.
Definitive Field Assessment
The Safariland 6TS RDSQ SLS Suppressor Holster finally brings duty-grade active retention and full-body protection to suppressed handguns. By uniting SLS rotating-hood security, 1.5-inch round suppressor clearance, red-dot and duty-light compatibility, and QLS 19 modularity, Safariland makes holstered suppressed pistol carry practical and secure in the field.
Product Specification Summary Table
| Specification / Feature | Safariland 6TS RDSQ SLS™ Suppressor Holster (6004RDSQ / 6005RDSQ) |
| Firearm Compatibility | Glock 19 & Glock 45 (All Generations) & Compatible Glock Clones (e.g., ZEV OZ9) |
| Suppressor Clearance | Round Suppressors up to 1.5″ Outer Diameter (e.g., Spectre 9, Omega 9K) |
| Weapon Light Requirement | SureFire X300U/T, Streamlight TLR-1HL/HL-X, Nightstick TWM-30/350/850XL |
| Red-Dot Optic Fitment | RMR/SRO/RCR, ACRO, Holosun 407–509, DPP, SIG Romeo, Vortex Defender |
| Retention Mechanism | SLS™ (Self Locking System) Rotating Hood w/ Removable Optic Guard |
| Shell & Interior Material | SafariLaminate™ (Boltaron) Thermo-Molded Body / Suede-Lined Interior |
| Mounting Hardware | Includes QLS 19 Locking Fork (Compatible w/ Safariland 3-Hole & QLS Systems) |
| Finish Options & MSRP | STX Tactical or 500D Cordura / $252.50 – $262.50 USD |
